08. Preparation

We have a need from some materials, documentations and hardware tools. All sizes are in millimeters (Metric)! Here you are the material's list (for exact details sizes check the drafts, all specifications are there):

VGA MXM II
South Bridge Copper Heatsink	“Enzotech SLF-1 Forged copper 1100 Fan & Heatsinks”
DDR Heatsinks (Copper) (2):	13 x 12 x 5.3
Copper Sheets Thicknesses: Heatsink (1): Strips & GDDR Pads (1): South Bridge Pad (1):	3 0.8 1.7
Screws: VGA Down Side (4): GPU Top Side (17): CPU Top Side (8): South Bridge (2):	M2.5 x 6 M2.5 x 3 M2.5 x 6 M2 x 6
Flat Washers: Video Adapter (4): South Bridge (2):	M2.7 M2.7
Spacers (Aluminum): ATI, Height (4): NVidia, Height (4):	2 3
Super-Slick Teflon PTFE Tape	“1/2" W X 5 Yards, Acrylic Adhesive, .005" Thickness, 350 ºF /176 ºC”
Loctite 243 Threadlocker, Blue	“Loctite 243 Threadlocker Adhesive, Blue, Medium Strength”
Thermal Adhesive	“Arctic Alumina Premium Ceramic Thermal Adhesive”
Thermal Compound	“IC Diamond” (currenly used) or “Shin Etsu X23-7783D”
Sandpaper Sheet	“Fine/180”
Isopropyl Alcohol
Cotton Balls & Swabs

09. Hardware Tools ( Don’t forget to use safety glasses! )

Socket Cap Screw M2.5 x 6 mm	Drill 2.05 .0807"	Hex-Shank Drill Chuck
Tap M2.5 x .45 mm	Tap Wrench T-Handle Style, 0 - 1/4" (1.6-6.3mm)	Prick Punch with Point Diameter 5/64"
Metric Aluminum Unthreaded Round Spacer, 6mm Od, 2mm Length, M3	Standard Diamond Hand File, Flat, Medium (120) Grit, 0.25" Width	Comfort-fit Wraparound Safety Glasses-xl Lens, Amber Lens
Hacksaw	Copper Sheet	C-Clamps
Spring Clamps	Vernier Caliper	Hex L-Key 1.5 mm
Screwdriver Size #PH 1	Hammer	Laser Paper 28lb / 105gr